Sindoh A610 Series, Service Manual

Page: 205 / 218

201
Once Tray 2 Motor Test begins, Tray2 Pickup DC motor and Tray2 Transport motor are
turned ON. Tray2 Pickup DC motor is turned off automatically after 1 second, and Tray2
Transport motor after 2 seconds.

T3 Motor Test
This is a test for determining whether Tray 3 Pickup DC motor installed in the main body is
working properly.
You can check the following motor in Tray 3 Motor Test Mode:
-
Tray3 Pickup DC motor
-
Tray3 Transport motor
To perform Tray 3 Motor Test:
1. Select HARDWARE TEST in Diagnosis Mode.
2. Select T3 motor test. (Entered Tray 3 Motor Test Mode. Test begins)
Once Tray 3 Motor Test begins, Tray3 Pickup DC motor and Tray3 Transport motor are
turned ON. Tray3 Pickup DC motor is turned off automatically after 1 second, and Tray3
Transport motor after 2 seconds
Error log

Print Log
Error log can be printed from additional analysis information.
To print error log:
3. Select Print Log from Error Log menu.
4. To exit Error Log menu, press Return .
Error Log Example:
00-102, [102 Tray2 Miss Feed Jam]

See Error code list