165
923
DB recovery failure
–
No backup DB
Attempts to restore DB failed. No backup DB.
1.
Check if problem recurs after POR.
2.
Replace system card if problem recurs.
924
DB recovery failure
–
backup DB integrity
check fail
Attempts to restore DB failed. Backup DB damaged.
1.
Check if problem recurs after POR.
2.
Replace system card if problem recurs.
925
DB recovery failure
–
backup DB copy fail
Attempts to restore DB failed. Failed to copy DB.
1.
Check if problem recurs after POR.
2.
Replace system card if problem recurs.
User Interactive Messages and Paper Jam Message
Paper jam and paper jam messages occur with the following reasons.
Bad pickup solenoid or solenoid cam abrasion
Flag and spring defect
Standard guide backup roller abrasion
Inappropriately adjusted standard guide
Obstacles in paper path
Different paper length than the length assigned from driver
User Interactive Messages & Paper Jam Messages (1xx)
Message
Description
Re-Insert Cartridge
Occurs when printer has failed to recognize cartridge or when
cartridge has not been installed.
4.
Reinstall cartridge and check if the problem recurs.
5.
Check the contacting point of the Smart IC card in the
cartridge and the system card.
6.
Replace cartridge.
Toner Cartridge
Change
Occurs when cartridge has expired.
1. Replace cartridge.
Replace Cartridge
Error
Occurs when a non-authentic, reusable cartridge is used.
1. Replace with an authentic cartridge.
Toner Low
Occurs
when more than the cartridge’s capacity has been used
(1000 or 500 sheets).
(1000 sheets for 7K and above; 500 sheets for 7K and below))
(e.g. For 13K, message appears when 13000-1000 = 12000.
For 3K, 3000-500 = 2500)
1.Print System Report to check amount of toner used.
Media Size Mismatch
Error
Occurs when paper size on the driver differs from the paper in
the printer.
1. Click OK to proceed.
2. Cancel if you do not wish to proceed.
Summary of Contents for A610 Series
