Sindoh A610 Series Service Manual Download Page 31

Page: 31 / 218

When the front door of the machine is closed, Link 1 connected to the front door moves in

the direction of 1. Lever no.2 moves consecutively by the moving link, and the Oldham

lever and dog-bone lever each push the coupler, connecting to the cartridge.

Removing Fusing Paper Jam

1. Removing paper from back of fuser unit

Gear link is pushed to the back, disconnecting gear and allowing jammed paper to be

removed.

2. Removing paper from front part of fuser unit

When the front door is opened, the link connected to the front door disconnects gears,

allowing jammed paper to be removed easily.

Remove

paper

Remov

paper

Remov

paper

Open the Front Door

Summary of Contents for A610 Series



























































































































































































































Search results

Summary of Contents for A610 Series

Reviews:

Related manuals for A610 Series

Brands by name

Popular brands

Sindoh A610 Series, Service Manual

Search results

Summary of Contents for A610 Series

Reviews:

Related manuals for A610 Series

Brands by name

Popular brands