Sindoh A610 Series, Service Manual

Page: 172 / 218

168
5. Check if delivery sensor works properly (Diagnosis
Mode)
6. If it does not operate, replace the sensor and test again
105 Paper Jam Occurs
when paper’s bottom does not get out entrance sensor
within a certain time
4.
Check if there’s an obstacle on paper delivery path after
the delivery sensor
5. Check if entrance sensor works properly (Diagnosis
Mode)
6. If it does not operate, replace the sensor and test again
106 Paper Jam Occurs
when paper’s bottom does not get out the delivery sensor
within a certain time
4. Check if
there’s an obstacle on paper delivery path after
the delivery sensor
5. Check if delivery sensor works properly (Diagnosis
Mode)
6. If it does not operate, replace the sensor and test again
107 Paper Jam
Occurs
when paper jam occurs at duplex unit’s path
6.
Check if there’s an obstacles on duplex unit’s paper path
7. Check if duplex solenoid operates properly
8. If it does not operate, replace the solenoid and test again
9. Check if entrance sensor works properly (Diagnosis
Mode)
10. If it does not operate, replace the sensor and test again