![background image](http://html.mh-extra.com/html/simu/simudrive-sd100hz/simudrive-sd100hz_installation-manual_1279433035.webp)
SIMUDRIVE SD100Hz
EN
35
5.2.5
Key contact
> Illustration 18
5.2.6
Antenna
> Illustration 19
6
ADVANCED PARAMETER SETTING
6.1
Using the programming interface
> Illustration 20
1]
Press the “
SET
” button for 0.5 s to enter parameter setting mode.
ð
Indicator light P0 flashes once.
2]
Press the “
+
” or “
-
” button to change the value of the parameter.
ð
The indicator light flashes x times to indicate the value selected.
3]
Press the “
SET
” button for 0.5 s to confirm this value and move on to the next parameter.
ð
If parameter P3 is selected, pressing the “
SET
” button for 0.5 s will cause you to exit parameter
setting mode.
4]
Press the “
SET
” button for 2 s to confirm a value and exit parameter setting mode.
ð
The integrated lighting and parameter setting indicator lights go out.