![background image](http://html.mh-extra.com/html/simu/simudrive-sd100hz/simudrive-sd100hz_installation-manual_1279433028.webp)
EN
SIMUDRIVE SD100Hz
28
2
PRODUCT DESCRIPTION
2.1
Composition
> Illustration 1
No.
Designation
Quantity
a
Housing cover
1
b
Housing screw
1
c
Programming interface
1
d
Antenna
1
e
Mounting b screw
1 + 1
f
Motor fuse
1
g
Spare fuse
1
h
Cable clamp + screw
1 + 2
i
Plug-in terminals (motor, anti-fallback and safety edge)
3
2.2
Description of the printed circuit board
> Illustration 2
Off
Slow flashing
Permanently lit
Rapid flashing
Very rapid flashing
No.
Designation
Comments
1
POWER indicator
: Electronic in motor setting mode
: Electronic fault (motor thermal cut-out, etc.)
2
PROG indicator light
: Radio reception
: Memorisation of a radio control point confirmed
: Awaiting memorisation of a radio control point
3
PROG button
Memorise / clear radio control points
4
SET button
Press for 0.5 s: enters and exits the parameter setting menu
Press 2 sec: enter motor setting mode / exit motor setting mode
Press 7 sec: delete settings
5
- button
In motor setting mode, closes the door when kept depressed
During parameter setting, modifies the value of a parameter
6
+ button
In motor setting mode, opens the door when kept depressed
During parameter setting, modifies the value of a parameter