SIMREX DataMover ESS, User Manual

Page: 25 / 188

SIMREX MAN.ESS-01, Rev. F DataMover ESS User’s Guide 17
SIMREX Corporation
Ethernet RJ-45
Straight-thru
Cable (CAT5) Cable assembly used to connect an Ethernet
device to the transceiver. Both ends of the cable
are wired identically.
(Cable length
≈
3 ft./1M)
CAB.ESS-
RJ45S
EIA-232
Shielded Data
Cable Shielded cable terminated with a DB-25 male
connector on one end, and a DB-9 female on the
other end. Two lengths available (see part
numbers at right). CAB.ESS-
DB25M-9F-6
(6 ft./1.8m)
CAB.ESS-
DB25M-9F-15
(15 ft./4.6m)
EIA-232
Shielded Data
Cable Shielded cable terminated with a DB-9 male
connector on one end, and a DB-9 female on the
other end, 6 ft./1.8m long. CAB.ESS-
DB9M-9F-6
Fuse Small, board-mounted fuse used to protect
against over-current conditions. ESS-FUSE-2A
Flat-Surface
Mounting
Brackets &
Screws Brackets: 2
″
x 3
″
plates designed to be screwed
onto the bottom of the unit for surface-mounting
the radio.
ESS-MNT-
BRKT
Screws: 6-32/1/4
″
with locking adhesive.
(Industry Standard MS 51957-26)
MS6-32-ESS
DIN Rail
Mounting
Bracket Bracket used to mount the transceiver to
standard 35 mm DIN rails commonly found in
equipment cabinets and panels. ESS-DIN-
BRKT
COM2 Interface
Adapter DB-25(F) to DB-9(M) shielded cable assembly
(6 ft./1.8 m) for connection of equipment or other
EIA-232 serial devices previously connected to
“legacy” units. (Consult factory for other lengths
and variations.) CAB.ESS-
DB25F-DB9M
SIMREX
DataMover
NMS Software PC-based network management system for
new-generation SIMREX transceivers. Allows
radio control and diagnostics in a hierarchal map
perspective. ESS-
NETMGR
Bandpass Filter Antenna system filter that helps eliminate
interference from nearby paging transmitters. ESS-FLTR-
A2
Ethernet Surge
Suppressor Surge suppressor for protection of Ethernet port
against lightning. ESS-SURGE-
RJ
Table 1-4. Accessories (Continued)
Accessory Description SIMREX Part
No.