SIMREX DataMover ESS, User Manual

Page: 101 / 188

SIMREX MAN.ESS-01, Rev. F DataMover ESS User’s Guide 93
SIMREX Corporation
• Scanning —The unit is looking for an Access Point beacon
signal.
• Exp(ecting) Sync(hronization)— The unit has found a valid
beacon signal for its network.
• Hop Sync— The unit has changed its frequency hopping pat-
tern to match that of the Access Point.
• Connected —The unit has established a radio (RF) connec-
tion with the Access Point, but has not obtained cyber-secu-
rity clearance to pass data.
• Associated —This unit has successfully synchronized and
associated with an Access Point. This is the normal status.
• Alarmed —The unit is has detected one or more alarms that
have not been cleared.
•
Current AP Mac Address
—Wireless address of Access Point with
which the Remote is associated.
•
Current AP IP Address
—IP address of Access Point with which
the Remote is associated.
•
Association Date
—Date of last successful association with an
Access Point.
•
Association Time
—Time of day association was established on
the association date.
•
Latest AP Firmware Version
—
•
AP Auto Upgrade
—
•
AP Reboot when Upgraded
—
Remote Listing Menu
(Access Points Only)
Figure 3-51. Remote Listing Menu
(List of transceivers associated with this AP)
•
MAC Address
—Hardware address of the Remote transceiver.
•
IP Address
—IP Address of the Remote transceiver.