SIMREX DataMover ESS, User Manual

Page: 63 / 188

SIMREX MAN.ESS-01, Rev. F DataMover ESS User’s Guide 55
SIMREX Corporation
Invisible place holder
Figure 3-20. Channel Config Submenu
(In the default configuration, all channels are disabled)
Key to channel indicators:
n
(no) = Radio channel is not used
y
(yes) = Radio channel is used
NA
(not available) = Radio channel is not available
•
Clear All
—This command clears all entries in the Channel
Config Menu, resetting the available channels to “no usage.”
Channels that are not available for use will appear with a
notation of or
NA
. These channels are not available because
of pre-existing conditions, and are not user-configurable.
•
Enter Channels
—This allows selection of the channels used
for frequency hopping operation. The selection of particular
channels will result in an indication of
y
. Be aware that these
channels do not become active until the
Commit Changes
selection is invoked.
•
Commit Changes
—This re-boots the radio and loads the active
channels into the frequency list for frequency hopping oper-
ation.
Radio Configuration Menu descriptions, continued...
•
Auto Data Rate Configuration
—This selection brings up a submenu
as shown in Figure 3-21 . For the settings in this submenu to
have any effect, the Data Rate menu item(Page 52) must be set
to
AUTO
.