Simrad NX40/45 Installation and Operation Manual
60
User card window
16
A user card is an optional plug-in card that can store
data files. There are three types of files: waypoints,
routes or a track.
To go to the user card window
>
More
>
User card
The user card window has:
File list
A list of the files on any user card in the unit.
To scroll up or down a page at a time
Waypoints, Routes
The number of waypoints and routes currently in the
unit.
Track 1 to Track 10
The number of points in tracks 1 to 10 currently in the
unit.
Note:
To save data onto the user card, use the Save
•
command (see below).
Data stored on the user card and shown on the file
•
list is not available to be used by the unit until loaded
into the unit with the LOAD command (see below).
Saving data to the user card
>
Save
>
Waypts
or
Routes
or
Tracks
This saves all the unit’s waypoints, all the unit’s routes or
one of the unit’s tracks to one file on the user card. For
Tracks, select the track number to save.
The new file is created. Change the name if required.
The new file appears in the file list.
Loading data from the user card to the unit
This loads one file from the user card to the unit:
A waypoints file: The new waypoints are added to
•
any existing waypoints in the unit. If a new waypoint
has the same name as an existing waypoint but has
CAUTION
!
!
CAUTION
DANGER
WARNING
Before using a user card,
remove any chart card
and plug the user card in.
When you have finished
with the user card,
remove the user card and
replace the chart card.
