Simrad GB40, Manual

Page: 83 / 156

4.2 3D Chart: Display
¾
To display the 3D Chart:
• Select
Pages
.
•
Select
3D Chart
, or select a Page that contains the 3D Chart
in one of the panes.)
If position data is available, the GB40 acquires your vessel's
position then displays the local area as a
3D Chart with your
vessel shown on it and the 3D Chart main menu on the right
side of your screen.
The status bar is the gray bar along the top of your 3D Chart .
If position data is available, it's shown as Lat/Long coordinates.
If Phantom Loran is On, the current GRI and the preferred TDs
are also shown below the Lat/Long coordinates.
4.3 3D Chart: Synchronize with Chart
If you display the Chart and the 3D Chart side-by-side in two
panes of a page, you can synchronize the two panes to show
different perspectives of the same area.
When the two screens are synchronized, the Chart settings are
always applied to the 3D Chart . For example, if you want to zoom
in on the 3D Chart , you must zoom in on the Chart ; then the
changes are duplicated on the 3D Chart .
¾
To synchronize 3D Chart and the Chart:
•
Select
Pages
. If you:
◦
don't have a page that shows 3D Chart in one pane and
Chart in the other pane, you must edit or create a page that
shows these two screens.
◦
do have a page that shows 3D Chart in one pane and Chart
in the other, select it.
•
Select the 3D Chart pane so that it becomes the active pane. If
you can't see the
Sync to Chart
button, select
Return
.
•
The
Sync to Chart
button shows the current setting. Select
it to change the setting.
◦ On
. The two screens are synchronized. The settings from
Chart , such as the zoom level, position, and orientation are
also applied to 3D Chart . Any changes to the Chart , such as
when you turn onto a new heading, are automatically
shown in
3D Chart too.
◦ Off.
Chart and the 3D Chart operate independently.
82 | 3D Chart