Simrad GB40, Manual

Page: 20 / 156

-Navigation Default Description
Waypoint Arrival Distance
(0.01-1
Nautical
Mile)
0.03
Sets the distance between the vessel
and the active waypoint before the
waypoint arrival alarm is activated and
the next waypoint becomes active.
At End of Route
Stop
Navigating
X
Keep
Navigating
Stop navigating. Cancels active route
and stops sending information to the
autopilot.
Phantom Loran
On / Off
Off
Displays Phantom Loran information on
the status bar of the chart screen.
Group Repetition Interval
(Group
Listings)
9960
Preferred TDs
None
2.4 Setup: Data sources
There are three options for selecting the data sources for the
system:
•
Local Reset - data sources are set automatically for the current
display unit only.
•
Global Reset - data sources are set automatically for ALL
display units in the network.
•
Automatic Data Source Selection - manually initiate the auto-
matic data source selection every time the unit is powered up.
Note: Ensure that the sources of the data are connected and
powered On.
¾
To reset Data Sources Locally or Globally:
Select
Pages
then
Setup
from the main menu.
Select either
Local Reset Data Sources
or
Global Reset
Data Sources
depending on your requirement.
Setup | 19