Simrad GB40, Manual

Page: 70 / 156

3.39 Chart: Select & follow/stop a route
The active route shows the destination waypoint in gold, with a
broken line extending from it to your vessel. The active route is
shown on every
Chart .
You can navigate along an active route yourself or by autopilot.
The GB40 automatically selects the first waypoint as the
destination waypoint.
When your vessel arrives at the specified distance from the
waypoint, the GB40 automatically sets the next waypoint as the
new destination waypoint and shows the completed leg as a grey
line.
When your vessel arrives at the last waypoint in the route, the
GB40 either stops navigating or keeps navigating, depending on
your choice.
If you want to go to a different waypoint or join a route at a
specific waypoint, just select that waypoint then select
Follow
Route From Here
. The GB40 creates a temporary waypoint at
your current position and draws a broken line between this and the
destination waypoint. The broken line shows the course you must
take.
¾
To select and follow a route from the Routes Library:
•
Select
Plot
. (If this button is not in the main menu, make the
Chart pane active, or select
Return / Settings
.)
•
Select
Routes Library
.
•
Select the route that you want to follow.
• Select
Follow Now
.
The GB40 displays the selected route on every Chart and
makes it the active route.
¾
To select and follow a route with GoTo:
•
Select
GoTo
. (If this button is not in the main menu, make the
Chart pane active, or select
Return / Settings
.)
• Select
Select
.
•
Select the route that you want to follow.
•
Select
OK
.
The GB40 displays the selected route on every Chart and
makes it the active route.
Chart | 69