background image

Disclaimer

As Navico is continuously improving this product, we 

retain the right to make changes to the product at any 

time which may not be reflected in this version of the 

manual. Please contact your nearest distributor if you 

require any further assistance.

It is the owner’s sole responsibility to install and use the 

equipment in a manner that will not cause accidents, 

personal injury or property damage. The user of this 

product is solely responsible for observing safe boating 

practices.

NAVICO HOLDING AS AND ITS SUBSIDIARIES, 

BRANCHES AND AFFILIATES DISCLAIM ALL LIABILITY 

FOR ANY USE OF THIS PRODUCT IN A WAY THAT MAY 

CAUSE ACCIDENTS, DAMAGE OR THAT MAY VIOLATE 

THE LAW.

Governing Language: This statement, any instruction 

manuals, user guides and other information relating 

to the product (Documentation) may be translated 

to, or has been translated from, another language 

(Translation). In the event of any conflict between any 

Translation of the Documentation, the English language 

version of the Documentation will be the official version 

of the Documentation.

This manual represents the product as at the time 

of printing. Navico Holding AS and its subsidiaries, 

branches and affiliates reserve the right to make 

changes to specifications without notice.

Feedback from you

Your feedback is important and helps Navico ensure 

that this manual is a valuable resource for all marine 

technicians. 

BSM-2 Installation manual | 1

E

NG

L

IS

H

Summary of Contents for BSM-2


























Reviews: