10 | BSM-2 Installation manual
Terminal connections
Select cable inlets according to cable diameter and
1
labelling on the front plate
POWER
XDCR HI
XDCR LO
SPEED
TEMP 1
TEMP 2
Cable
Cable diameter
M20
Transducer 1
-
Transducer 2
-
10.0 mm - 14.0 mm
(3.94” - 5.51”)
M16
Power
-
Speed
-
Temperature 1
-
Temperature 2
-
6.0 mm - 10.0 mm
(2.36” - 3.94”)
2
Remove the outer sealing nuts from selected cable
glands, and thread those on to the cables
3
Terminate the wires to the terminal blocks
according to the terminal specification in the
following pages
Connect the terminal blocks to the pcb
4
Tighten the outer sealing nuts by hand
5
Close the BSM-2 cover and secure the cables
6