Simpson Amik 300 Operating Manual Download Page 72 | Manualshive

Page: 72 / 72

Simpson Amik 300 Operating Manual Download Page 72

The Information contained in these installation instructions is for use only by installers trained to make electrical power installations and
is intended to describe the correct method of installation for this product. However, Company has no control over the field conditions
which influence product installation.
It is the user's responsibility to determine the suitability of the installation method in the user's field conditions. Company only
obligations are those in Company standard Conditions of Sale for this product and in no case will Company be liable for any other
incidental, indirect or consequential damages arising from the use or misuse of the products.

Simpson Electric Company
520 Simpson Avenue
Lac Du Flambeau, WI 54538-0099 (USA)
Web: www.simpsonelectric.com
Contact: +1 715-588-3311

Caution, risk of electric shock.

Attention, risque de choc électrique.

Manual Part No. 06-118318
Edition 2, 05/18

«
...
70
71
72

Summary of Contents for Amik 300









































































Reviews:

No comments