Simpson Amik 300, Operating Manual, Page: 23 / 72

3.2.1.9 ENERGY ON RS485.
screen. Touching radio button in front of particular option will
T hree options: WATT, KILO-WATT & MEGA-WATT are displayed on
select that option.
Touch on “ key” will confirm the setting.
OK
and will return to previous menu.
Touching the “ key” will keep the old selected setting
BACK
This screen enable user to set energy in terms of Wh / kWh / MWh on Rs485 Output
depending as per the user’s requirement .This setting is applicable for all types of energy..
LINE-NEUTRAL VOLTAGE
VL2
VL2 VL2
LINE-NEUTRAL VOLTAGE
VL2
VL2 VL2
LINE-NEUTRAL VOLTAGE
VL2
VL2 VL2
CT SECONDARY
5 AMPERE
1 AMPERE
LINE-NEUTRAL VOLTAGE
VL2
VL2 VL2
LINE-NEUTRAL VOLTAGE
VL2
VL2 VL2
LINE-NEUTRAL VOLTAGE
VL2
VL2 VL2
ENERGY ON RS485
WATT (W)
KILO-WATT (KW)
MAIN MAIN MAIN MAIN MAIN MAIN OK BACK
MEGA-WATT (MW)
Note : Default value is set to ‘WATT’ i.e. Energy on Modbus will be in
terms of Wh/VArh/VAh/Ah respectively.
Touching radio button in front of particular option will select that option.
If Energy on RS485 is in WATT then rollover count can be from
Touch on “ key” will confirm the setting.
OK
Touching the “ key” will keep the old selected setting and will return to previous menu.
BACK
3.2.1.
10 ENERGY DIGIT RESET COUNT (ROLLOVER COUNT)
LINE-NEUTRAL VOLTAGE
VL2
VL2 VL2
LINE-NEUTRAL VOLTAGE
VL2
VL2 VL2
LINE-NEUTRAL VOLTAGE
VL2
VL2 VL2
CT SECONDARY
5 AMPERE
1 AMPERE
LINE-NEUTRAL VOLTAGE
VL2
VL2 VL2
LINE-NEUTRAL VOLTAGE
VL2
VL2 VL2
LINE-NEUTRAL VOLTAGE
VL2
VL2 VL2
ENERGY DIGIT RESET COUNT
7 DIGITS
9 DIGITS
MAIN MAIN MAIN MAIN MAIN MAIN OK BACK
11 DIGITS
8 DIGITS
10 DIGITS
12 DIGITS
This screen
rollover to zero depending on the setting of Wh, kWh & Mwh in Energy on RS485 option. enables the user for setting maximum energy count after which energy will
13 DIGITS 14 DIGITS
7 to 14 DIGITS.
If Energy on RS485 is in KILO-WATT then rollover count can be from
7 to 12 DIGITS.
If Energy on RS485 is in MEGA-WATT then rollover count can be from
7 to 9 DIGITS.
21
Note :
1) Default value of energy digit reset count is set to “14” i.e. if energy cross the
14 digit count it will rollover to zero.
2) If Energy on RS485 is set to kW & energy digit reset count is set to 12, Energy
screen on display will show “-------” i.e. energy overflow when energy cross the
11 digit count.
3) If Energy on RS485 is set to MW & energy digit reset count is set to 9, Energy
screen on display will show “-------” i.e. energy overflow when energy cross the
8 digit count.