Simpro Microstacker, User Manual

Page: 26 / 40

4.6.3 Annual inspection
The following inspection should be carried out annually, and the results recorded in the log.
Annual Inspection Checklist
Category No. Item Check
General 1 Entire machine
Visually inspect for dented or broken parts.
Conduct a complete lifting cycle and check for any
faults or abnormal behaviour.
Hydraulic
systems
2 Hydraulic ram Check there are no oil leaks.
3 Oil reservoir
Drain and replace the hydraulic fluid as per §4.5.5 .
Clean the oil suction filter.
4 Lowering valve Remove and clean.
Electrical
systems
5 Charging lead
Check that the charging lead is in good condition,
with no frayed or damaged insulation.
Safety
systems
6
Dual-hand
controls
Check that dual-hand controls operate correctly,
and machine stops instantly when one button is
released.
7 Safety Labels
Check that all warnings labels, guides etc are
attached and clearly legible.
Mechanical
systems
8
Mast, lifting
carriage and
arms
Not twisted or damaged.
No cracked or broken welds.
9 Inside mast Lightly lubricate with silicone spray.
10 Wheels
Check that the wheels are running smoothly, and the
park brake is working correctly.