Simpro Microstacker, User Manual

Page: 16 / 40

3. Handling, Transport & S torage
3.1 Assembly
The Microstacker is usually delivered fully assembled.
3.2 Moving
When the machine is standing upright it may be easily moved on its wheels, using the
steering tiller. To ensure stability, the lifting carriage should be positioned just off the ground
when moving the machine.
Extra care should be taken when moving the machine on sloping ground.
3.3 Lifting
If the machine needs to be lifted for any reason, carry out the following procedure:
1. Confirm the weight of the machine on the rating plate and check that the lifting
equipment that is to be used has sufficient capacity.
2. Affix a lifting sling or chain around the top frame cross-member (or to the lifting lugs if
provided).
3. Use one person to operate the lifting equipment, and at least one other person to
watch for obstructions and hold the machine steady if required.
4. Lift, move and lower the machine into place, ensuring it always remains upright.
The Microstacker weighs between 150kg and 200kg. Always verify the weight of the
machine on the rating plate, and check the lifting equipment that is to be used has
sufficient capacity.
Never stand or reach underneath the machine while it is being lifted.
3.4 Transportation
Carry out the following procedure to prepare the machine for transport:
1. Apply the brake and press the Emergency Stop.
2. Use appropriate lifting equipment to place the machine onto a wooden pallet, and
securely strap it into place. If necessary, the Microstacker can be laid over onto its left
or right side before being strapped down.
To prevent oil leaks and damage to the frame, do not lie the machine onto its front or
back for transport.
3. Load the pallet onto the truck or trailer.
4. Tie the pallet and machine into position using only marked tie-down points and strops
rated to at least 1000kg. Ensure it is fastened against lateral forces from any direction.