User Manual
// Simpro Microstacker
Original Instructions // English // v2.0 // August 2022 // Page
32
Crushing due to machine falling over
Operator
LO:
2
FE:
4
DPH:
8
NP:
1
Risk Factor: 64
Moderate risk when the Microstacker is lifting heavy bins to its full height, or
when operating around low doorways.
Other
persons
LO:
2
FE:
1
DPH:
10
NP:
1
Risk Factor: 20
As above.
Control
measures
When moving heavy bins, operators are required to lower the lifting carriage
to below 500mm. The carriage should only be raised higher than this
immediately prior to placing or removing bins from racking.
Operators are required to remain watchful for and avoid overhead hazards
such as low doorways and light fittings.
The Microstacker must not be operated on soft or uneven ground, or on
ground with a slope ratio higher than 1:12.
Comments
Electrocution or electric shock
Operator
LO:
0.5
FE:
4
DPH:
15
NP:
1
Risk Factor: 30
Some risk is always present when using equipment with a mains charging lead.
Other
persons
LO:
0.5
FE:
4
DPH:
15
NP:
1
Risk Factor: 30
As above.
Control
measures
All power sockets used to recharge the Microstacker must be fitted with a
Residual Current Device (RCD). All leads and power cables should be regularly
checked and tagged by a registered electrician.
Comments
Contamination from lifting toxic powder and liquid
Operator
LO:
2
FE:
4
DPH:
1
NP:
1
Risk Factor: 8
Great care should be taken when lifting bins containing powder or liquids.
If the product could cause any harm whatsoever to the operator or other
personnel, all persons in the vicinity must wear appropriate PPE.
Other
persons
LO:
2
FE:
4
DPH:
1
NP:
1
Risk Factor: 8
As above.
Control
measures
All operators must wear appropriate Personal Protective Equipment (PPE).
Where possible, persons other than the operator should be kept clear of the
operating area.
Comments
Toxic materials which cannot be controlled by the use of appropriate PPE
must not be handled with the Microstacker. Alternative methods should be
used.
Damage to skin when used in extreme environments
Operator
LO:
2
FE:
4
DPH:
1
NP:
1
Risk Factor: 8
If the machine is to be used in extreme cold or heat, the operator must wear
gloves and other suitable Personal Protective Equipment.
Other
persons
LO:
2
FE:
4
DPH:
1
NP:
1
Risk Factor: 8
As above.
Control
measures
All personnel must wear appropriate Personal Protective Equipment (PPE)
when operating equipment in extreme environments.
Comments
Summary of Contents for Microstacker
