SimpliFire • SF-SC43-BK, SF-SC55-BK, SF-SC78-BK Service Manual • 2041-960 Rev. B • 9/19
4
Accessing Internal Components
(Receiver,
Flame Screen, Rotisserie assembly, Rotisserie
motors, Flame and Ember bed LEDs,
Reflective Side Panels)
1. Remove Front and Trim Assembly, see Front
replacement instruction.
2. Remove Glass, see Glass replacement instruction.
3. Remove media/logs from ember bed.
4. Remove Glass Support Brackets from the top by
removing two (2) screws from each side. See
Figure 10.
5. Remove the screws in each of the brackets holding
the Side reflective panels in place. See Figure 11.
6.
Carefully slide each panel toward the center of the
appliance and remove. See Figure 12.
7. Remove screws holding ember bed cover down. Lift
the cover out of the appliance. See Figure12.
8. While supporting the rear glass panel remove the
screws in each of the rear glass panel brackets.
See Figure 13 and 14.
9. Tip the top of the glass forward and carefully lift the
glass out of the appliance. This will require 2 people
on the 78” unit.
Figure 10
Figure 11
Figure 12
Figure 13
Figure 14
GLASS PANEL BRACKETS
SIDE REFLECTIVE PANEL
EMBER BED COVER
