5
SimpliFire • SF-SC43-BK, SF-SC55-BK, SF-SC78-BK Service Manual • 2041-960 Rev. B • 9/19
Clean Face Receiver Replacement
1. Remove Front and Trim Assembly, see Front
replacement instruction.
2. Remove Glass, see Glass replacement instruction.
3. Remove media/logs
4. Access internal components, see Accessing Internal
Components instruction.
5. Disconnect the receiver cable. See Figure 15.
6. Using a pliers, compress each barbed clip while
lifting the Remote Receiver Board evenly to
disengage it from the clip. See Figure 15.
7.
Carefully align the new Remote Receiver Board
to the barbed clips and gently push in place. See
Figure 15.
8. Securely reconnect the wiring harness to the new
remote receiver. See Figure 15.
9. Re-install components removed to access internal
components, see Accessing Internal components
instruction.
10. Re-Install glass.
11. Re-Install Front and Trim Assembly.
Figure 15
Flame Screen Replacement
1. Remove Front and Trim Assembly, see Front
replacement instruction
2. Remove Glass, see Glass replacement instruction
3. Access internal components, see Accessing Internal
components instruction.
4. Remove the screws in the top Flame Screen
retaining bracket and the side Flame Screen
retaining brackets. Then remove the screws in the
bottom left and right corners of the Flame Screen.
Remove the Flame Screen. See figure 16.
5. Install the replacement Flame Screen panel, smooth
side facing out, and re-attach brackets and screws.
See figure 16.
6. Re-install components removed to access internal
components, see Accessing Internal components
instruction.
7. Re-Install glass.
8. Re-Install Front and Trim Assembly.
Figure 16
RECEIVER
CABLE
BARBED
CLIPS
BRACKETS
SCREWS
