Simplex, Inc., 5300 Rising Moon Road, Springfi eld, IL 62711-6228 • 217-483-1600 • Fax 217-483-1616
SPump6-HMI.indd (7/11) • © 2011 Simplex, Inc. All Rights Reserved. • Printed in the USA. • www.simplexdirect.com
FUEL SUPPLY SYSTEM MANUAL with Touchscreen • SmartPump • page 3 of 22
®
4. See Wiring Drawing. Run all wiring
in solid conduits.
a. Connect control power to terminal
block as shown on the drawings
shipped with the equipment.
b. Using #18 AWG or larger, con-
nect the fl oatswitch assembly as
shown.
Typical Transmitter and PLC Analog Input Electrical Schematic
and Typical Floatswitch Connections to TB‘B’
c. If required, connect leak sensors
and remote alarm contacts as
shown. Contacts are rated.
d. Using #18 AWG or greater
shielded wire, connect contacts
on the Smartpump to the Level
Transducer as shown.