Simplex, Inc., 5300 Rising Moon Road, Springfi eld, IL 62711-6228 • 217-483-1600 • Fax 217-483-1616
SPump6-HMI.indd (7/11) • © 2011 Simplex, Inc. All Rights Reserved. • Printed in the USA. • www.simplexdirect.com
FUEL SUPPLY SYSTEM MANUAL with Touchscreen • SmartPump • page 8 of 22
®
Standard Transmitter
INSTALLATION
TRANSMITTER
The Transmitter is mounted on the tank
top and must span entire inside height
of tank for an accurate measurement
(See Standard Transmitter Drawing).
A weatherproof conduit hub with
0.50NPT conduit fi ttings is provided for
electrical connections.
Connection
Using a 3 conductor shielded cable, #20
AWG, connect TC-25 Level Transmit-
ter to terminal block as shown on the
electrical drawings.
LEVEL TRANSMITTER
OPERATIONAL
VERIFICATION
1. Check drawings for changes in
specifi cations (e.g. size of tank,
percentage or gallons).
2. If there are no changes in the specifi -
cations the unit is ready for a system
check.
Care must be taken when installing
the system. Incorrect wiring will
damage the Receiver/Indicator.
Follow drawing provided with sys-
tem for proper installation.
