Simplex LifeAlarm 4005 Series Programming Instructions Manual Download

Page: 51 / 143

2-39

To set the 4005’s time and date follow the steps below.

1. Log in to the 4005.

2. Press <Menu> (A).

Figure 2-36. Typical Screens Used to Set

the Time and Date

3. Press <Next> or <Previous> to scroll through the menus until

[

7LPH'DWH

] is displayed (B), and then press <Enter>.

The focus brackets ( [ ] ) appear around the Hours in the time field (C).

4. Press <Next> or <Previous> to scroll through the numbers for the hours.

Note:

Pay attention to AM or PM when setting the time in 12-Hour
format. The AM/PM field can not be selected.

5. Press

> or <

> to move the focus brackets to the Minutes in the time

field (D).

6. Press <Next> or <Previous> to scroll through the numbers for the

minutes.

7. Press

> or <

> to move the focus brackets to the Date in the date

field (E).

Continued on next page

Setting the Time and Date

),5(

683(59,625< 7528%/(

0HQX >9LHZ3RLQW@

),5(

683(59,625< 7528%/(

0HQX>6HW7LPH'DWH@

6HW6\VWHP7LPH

>@SP6XQ2FW

6HW6\VWHP7LPH

>@SP6XQ2FW

Technical Manuals Online! - http://www.tech-man.com

Summary of Contents for LifeAlarm 4005 Series
















































































































































Search results

Summary of Contents for LifeAlarm 4005 Series

Reviews:

Related manuals for LifeAlarm 4005 Series

Brands by name

Popular brands

Simplex LifeAlarm 4005 Series, Programming Instructions Manual

Search results

Summary of Contents for LifeAlarm 4005 Series

Reviews:

Related manuals for LifeAlarm 4005 Series

Brands by name

Popular brands