1. INTRODUCTION & FEATURES
8
1
I
NTRODUCTON:
Thank you for purchasing the EP40. We are confident this Time Recorder
will give you full satisfaction. Items such as the time and date are preset
at the factory. After plugging in the AC power the Time Recorder can be
used immediately. However, we recommend reading this manual before
you start using your Time Recorder.
F
EATURES:
The Quartz Time Recorder
Dot-Matrix printer
Perpetual calendar
Automatic daylight saving time
4-way print activation
Automatic
Manual
Semi-automatic
Combination
Adjustable print position
Prints in 7 languages
Prints numbers/date
Time table program
Special mark printing
13 preprogrammed comments
Alphanumeric printing
Selectable 4-digit year imprint
12 or 24-hour format
Regular minute, 1/10, 1/100
or 5/100 of an hour
Password for program protection
Digital LCD (Date, Hour,
Minute, Day of the week
indication)
Wall or desktop mount
Full power reserve (optional)
Slave clock functions (optional)
Built-in buzzer (optional)
External Time Signal (optional)
Caution:
Do not use in places:
Subject to high humidity and dust.
Exposed to strong or continuous vibrations.
Exposed to direct sunlight.
The temperature range in which all functions of the Time Recorder will
operate correctly is from -5˚C to 45˚C. Be sure therefore to place and
use your Time Recorder only in locations in which this temperature
range is not exceeded. Take care also not to subject your Time Recorder
to any sudden, sharp temperature variations.
Main applications : Payroll/job cost recorder, time stamp or numbering
machine.
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
For questions about the operation of this time clock, or to
order supplies and accessories, please contact Simplex
Grinnell at (888)777-9237.
2.BEFORE USING THE TIME RECORDER
9
2
Package Contents
Unpack the Time Recorder and check its contents to ensure that the Time
Recorder unit and all accessories as shown below are included.
Keys
................2 pcs.
................1 pcs.
.......4 pcs.
....1 sheet.
Ribbon Cassette
Wall-Mount Fittings
Screw
Template
The ribbon casette is
installed at the factory.
<Back view>
Location of Name
<Front view>
<Cover off>
JAN 31 12:00
JAN 31 12:00
JAN 31 12:00
15mm
30mm
<Print position adjuster>
Display
Ribbon cassette
Print head
Control buttons
User's Manual
Print position from the
card edge is adjustable
by pressing and sliding
the
position
button located on the
right outside bottom of
the Time Recorder.
Maximum
distance
from edge of form to
print is approximately
1 3/16"(30mm).
Attached Accessories
Print Position on Time Card
Wall-mount holes
Cover
Display
Push bar
Key hole
AC power plug
(115VAC model)
ENGLISH
