24. REPLACING THE RIBBON CASSETTE
52
46
45
1
Unlock the key and remove the cover.
2
Hold the ribbon cassette by its tab and
pull straight out to remove it.
3
Turn the knob of the new cassette in
the direction of the arrow (clockwise)
to tighten the ribbon.
4
Place the cassette inside the Time
Recorder as shown in the figure. Push
the ribbon until it snaps into position.
Turning the knob on the ribbon
cassette may make installation easier.
53
46
47
5
Turn the knob of the cassette in the
direction of the arrow to tighten the
ribbon.
6
Replace the cover and lock.
NOTICE: Install the cassette so that the
ribbon is between the print head and the
ribbon mask. Printing will not come out
properly if the ribbon is placed behind
the ribbon mask.
Ribbon
Ribbon mask
Print head
ENGLISH
