3 Product-specific safety instructions
WARNING
Blocking of escape routes due to faulty function
If mortise locks with panic function are to be used together with a locking
cylinder, improper use of locking cylinders may result in the panic function
not functioning properly.
1. Make sure that all parts of the closure are in working condition (EN 179).
2. Only install the cylinder in mortise locks for which it has been expressly
approved (refer to the documentation of the lock manufacturer).
Locking in people as a result of closures or sealing strips on the door unit
If locks or sealing strips are attached to the door unit, the locking cylinder may not function prop-
erly.
Make sure that any locks or sealing strips do not interfere with the operation of the locking
cylinder.
IMPORTANT
Assembly error due to incorrect length
The AX locking cylinder is available in various lengths. If you order the wrong length, the AX lock-
ing cylinder cannot be installed correctly.
Order your AX locking cylinder in the correct length or adjust the length yourself.
Mechanical damage to the thumb turn as a result of obstacles
If the thumb turn can knock against the wall or other objects as a result of the installation situ-
ation, it may become damaged.
In such situations, use a suitable door stop.
Damage caused by moisture in outdoor use
Moisture can damage the electronics.
1. If you want to use the locking cylinder for outdoor applications or in high humidity (bathrooms
or washrooms), use the WP version.
2. Carefully insert the locking cylinder to avoid damaging the O-rings.
Damage to the AX locking cylinder due to unsuitable tools
Special tools are required to open the cover and dismantle the AX locking cylinder. If you use un-
suitable tools, you may damage the AX locking cylinder.
Only use the separately available SimonsVoss special tool (
Digital Cylinder AX
(Z5)
(Manual)
3. Product-specific safety instructions
9 / 158
Summary of Contents for Digital Cylinder AX
