InSync
®
L Installation Instructions
Pg. 1 of 2
© SAFLOK™
WL 4/23/2008
L a tc h B o lt
W ith ta ilp ie c e h o riz o n ta l,
fe e d th ro u g h b o tto n h o le
A tta c h trim
w ith s u p p lie d
1 /4 -2 0 s c re w s
F e e d w ire s th ro u g h
th is h o le
F e e d w ire s
th ro u g h m id d le h o le
O u ts id e T rim
InSync
®
L
Installation Instructions
All parts needed to install the InSync
®
L lock are included with each unit. Check to make sure all
parts are accounted for before beginning installation. Do not substitute any of the parts. The use of
substitute parts will result in poor performance of the lock.
1. Prepare the door using the InSync L installation
template.
2. Prepare the door frame using the template and install
the strike plate using the screws provided.
3. Install the latch bolt in the door edge and fasten it to
the door with the screws provided (see Fig. 1).
4. With the tailpiece in the horizontal position (see Detail “A”),
place the outside trim in position. Feed the tailpiece
through the bottom 1/2” hole and CAREFULLY feed the
wires through the middle 1/2” hole (see Fig. 1).
All information contained herein, including but not limited to product pricing and other intellectual property, is confidential and
intended for the sole use of the addressee(s) so named. Any misuse of this confidential information contained herein may result in
legal action by Computerized Security Systems dba SAFLOK and its parent company.
Detail “A”
Fig. 1
Detail “B”
Cam base
must be
horizontal
Outside Trim
Feed the wires through the
middle hole
Attach the trim with the
1/4-20 screws
Feed the wires
through this hole
Latch Bolt
With the tailpiece horizontal,
insert through the bottom hole
