ENGLISH
Technical characteristics
A991558
11-
28-
2019 1/5
Screw the bidirectional mounting plate and the magnet
onto the wall, door or window frame. Open the basepla-
te of the magnet with a screwdriver.
The sensor should not be mounted directly on or near
metal framing or other large metallic objects since metal
objects may weaken the radio signal strength.
The sensor should only be placed indoors and away from
water and other extreme weather conditions.
There are two ways to install it:
OPENING/CLOSING SENSOR
IO
CONFIGURATION
NAME
VALUE
85
1
The opening/closing sensor can send a
command to nodes associated with
group 2
0x00 --> to nodes associated with group 2 when motion alarm is trigge-
red and Send Basic set value = ON to nodes associated with group 2 when
alarm is cancelled.
0xFF --> to nodes associated with group 2 when motion alarm is triggered
and Send Basic set value = OFF to nodes associated with group 2 when
alarm is cancelled.
SIZE
ASSOCIATION GROUPS
Group 1 General: Lifeline
5
1. Notification Report. Sensor will send Notification Report when the sensor body and mag-
net removed or combined.
2. Battery Report. Sensor will send BatteryReport when the battery level is low and the
battery report’s value is0xFF.
Number of Groups
Max. devices in Group
Automatic reports
Number of Groups
Max. devices in Group
Actions
Supported Notification
Access Control (0x06)
Access Control (0x06)
Home security (0x07)
Group Control: Key01
5
1. Basic Set Sensor will send Basic Set when the sensor body and magnet removed or combined
Supported Notification Type
Window/Door is open (0x16)
Window/Door is closed (0x17)
Tampering, Product covering removed (0X03)
Inclusion button
Tamper button
The two parts of the sensor should be placed so that,
when the door/window is closed, they are within 10mm
of each other. By opening the door or window, the
sensor body and magnet should separate in proximity.
1
Ensure that the orientation marks of the sensor body and the magnet are oriented towards
each other.
3
Press the latch button to remove the cover from the sensor body.
4
Close the cover.
7
Attach the double-sided mounting tape to the covers
and attach to the wall, door or window frame.
2
Download the Simon iO application. After creating the installation, go to “Devices” and
click on add device, which can be found at the top right of the application.
5
Press for three seconds on the inclusion button and the LED will blink intermittently. Then
close the cover.
6
Go to “Devices” and click on add device.
Download the Simon iO application.
SIMON, S.A.U.
Diputación, 390-392 / 08013 Barcelona
[email protected] Tel: (+34) 902109700
www.simonelectric.com
A
B
5.1
5.2
BATTERY REPLACEMENT
The battery can last around two years under normal conditions. High temperatures, high humidity or
other poor conditions may shorten battery lifespan. We recommend changing the battery promptly
when low power indication occurs.
Opening/Closing Sensor is used for detecting the opening or closing of doors and windows.
KEYPAD USE & FEEDBACKS
EVENT
BUTTON
ACTION
DEVICE
STATUS
BATTERY
STATUS
LEDs
FEEDBACK
DEVICE
ACTION
No pressed
Long press
(2s<t<30s)
Short press
(t<2s)
Long press
(t>30s)
Short press
(t<2s)
Long press
(2s<t<30s)
Not included on
Z-Wave network
Not included on
Z-Wave network
Included on
Z-Wave network
Included on
Z-Wave network
Normal
Normal
Normal
Normal
Waking up
device
Pressing
the button
Reset
default
Pressing the
button
Add/
Removing
device from
Z-wave
Network
The device wakes up
No feedback
LED blinks intermittently
every 600ms, 3 times
LED blinks intermittently
every 2 seconds, 3 times
LED turns on for 2,5
seconds an then turn OFF
LED blinks intermittently
every 2 seconds, 3 times
LED blinks intermittently
every 300ms
The device sends a Node
Info to include or exclude
from the Z-wave Network
Configurations are set to
default values, it sends a
“Device Reset Locally to
Z-Wave controller” and
excludes from current
Z-Wave network
LED blinks intermittently
every 200ms, 15 times
No feedback
Wake Up - Wake Up Notification is transmitted:
- Once every 24h --> Wake_Up capabilities from 30min to 24h and default 24h.
- When user presses the button for 2sec<T<30sec and device is included.
WAKE UP
This is a Z-Wave Plus® Product using the latest S2 Security Encryption. This product can be operated
on any Z-Wave network with other Z-Wave certified devices from other manufacturers. All non-ba-
ttery operated nodes within the network will act as repeaters regardless of vendor to increase the
reliability of the network.
Z-WAVE COMPLIANCE
DESCRIPTION
Z-WAVE SPECIFICATIONS
SUPPORTED COMMAND CLASSES
COMMAND CLASS ASSOCIATION GROUP INFO
COMMAND CLASS ASSOCIATION V2
COMMAND CLASS BATTERY
COMMAND CLASS CONFIGURATION
COMMAND CLASS DEVICE RESET LOCALLY
COMMAND CLASS FIRMWARE UPDATE MD V3
COMMAND CLASS MANUFACTURER SPECIFIC V2
COMMAND CLASS NOTIFICATION V5
COMMAND CLASS POWERLEVEL
COMMAND CLASS SECURITY
COMMAND CLASS SECURITY 2
COMMAND CLASS SUPERVISION
COMMAND CLASS TRANSPORT SERVICE V2
COMMAND CLASS VERSION V2
COMMAND CLASS WAKE UP V2
COMMAND CLASS Z-WAVE+ INFO V2
Z-WAVE DEVICE SPECIFICATION
Device Type
NOTIFICATION SENSOR
Generic Device Type
Specific Device Type SPECIFIC_TYPE_
POWER_SWITCH_BINARY
Role Typ
REPORTING_SLEEPING_
SLAVE
Max
10mm
Latch
button
INSTALLATION
100
0x214-039
1
LED
x2
AAA
1.5V
Main Body
75x28x18mm
Magnet
75x12x18
POWER SUPPLY
DIMENSIONS
INDICATORS
2
YEARS
under normal
condition
BATTERY LIFE
For more information on the EU
Declaration of Conformity and
Z-Wave
™
frequencies, consult the product sheet on
our website simonelectric.com
*
*
