9.10. ALARM
Put the portable into Alarm mode.
9.11. REPEATER DEFEAT (TALKAROUND)
Allows the radio to transmit on the reverse frequency on a Repeater Channel.
When the key is pressed again (or the Channel is changed) the transmit frequency
reverts to the original setting.
9.12. LOW POWER
Forces the radio in to low power.
Pressing again puts the radio back to the power level defined for the current channel.
This is not affected by Channel changes.
9.13. DTMF MODE
This function places the numeric keypad into DTMF mode. See Section 5.8.
9.14. SCRAMBLER ON/OFF
This function toggles the operation of the frequency inversion voice scrambler.
9.15. SEND DTMF1/2
This function sends a pre-programmed string of up to 16 DTMF digits.
9.16. USER CTCSS
If enabled by the FPP, this function will allow the user to select the CTCSS tone to be
used.
9.17. SEND CHANNEL ENCODE
Sends the encode that has been defined for that particular channel.
9.18. CHANNEL UP AND DOWN
These functions change channels in the upward or downward directions.
9.19. MODE
This function changes the mode of the radio. The radio can be switched between PMR,
MPT1327, P25 and other modes as configured. Press once to view current mode and
again within one second to step through modes. Releasing the button will change the
mode to that displayed.
Doc Number:
TNM-U-E-0089 ISSUE 2.2
Page
42
