9 SPECIAL FUNCTION KEYS
This section lists Functions that may be programmed to the Function keys F1 to F6.
Selected functions may also be programmed into the Three Position Function Switch.
Consult Simoco Wireless Solutions for those functions that have been programmed in
to your radio.
9.1. MONITOR
Opens/Closes the audio (signalling) mute.
Only valid on Non-Community Repeater type channels and/or Closed Selcall channels
without Receiver Lock-out programmed.
9.2. SQUELCH DEFEAT
Opens/Closes the squelch (carrier) mute.
9.3. RESET
Closes the audio (signalling) mute on closed Selcall Channels.
9.4. SEND-2
Sends a specific Selcall sequence.
9.5. TRANSPOND
Enables/Disables individual Call Acknowledge.
9.6. CTCSS
Defeats the CTCSS mute on the channel.
Only valid on Non-Community Repeater type channels and/or Open Selcall channels.
9.7. MUTE
Provides direct access to the Mute Setup Screen (see Section 6.1.2) and allows the user
to change the mute level from that screen.
9.8. GO TO CHAN A, B, C, D
Selects predefined Channel A, B, C or D, and (may) return on the second press.
The Defined Channel may be redefined if held for approximately 2 seconds.
9.9. SPECIAL ENC 1…8
Sends Special Encode 1, 2, …, 8.
Doc Number:
TNM-U-E-0089 ISSUE 2.2
Page
41
