Simex SWP-99, User Manual

Page: 36 / 56

User manual for Digital Indicator and cooperating software
Register Write Range Register description
1Fh Yes 0÷3
Control registry for time-related settings:
0 - startup of continued update of registries 18h ÷ 1Eh by internal
clock (current time and date),
80h - stopping update of registries 18h ÷ 1Eh by internal clock
(automatically after writing one of 18h ÷ 1Eh registries). In this status
18h ÷ 1Eh registries can be written with new values in order to update
internal clock settings. Updating the clock settings with contents of
18h ÷ 1Eh registries can be executed by sending the following
commands to the control registry:
1 - hour update on the basis of (1Ch ÷ 1Eh) registries’ contents;
2 - date update on the basis of (18h ÷ 1Bh) registries’ contents;
3 - time and date update on the basis of (18h ÷ 1Eh) registries’
contents.
After sending commands
1 , 2 or 3 the contents of registries
automatically return to 0.
20h 2 Yes 0÷199 Address of device
21h No 009Ch Device identification code
22h 3 Yes 0÷7
“ Baud rate ” parameter in “ RS485 port settings ” menu (baud rate):
0 - 1200; 1 - 2400; 2 - 4800; 3 - 9600; 4 - 19200; 5 - 38400;
6 - 57600; 7 - 115200;
23h 4 Yes 0÷1
“ Conf. change ” parameter in “ RS485 port settings ” menu
(permission to write registers):
0 - write denied; 1 - write allowed.
28h No Firmware version
29h No Compilation number
2Ah No Higher (2
nd
) word of serial number
2Bh No Lower (1 st ) word of serial number
2Ch No 1, 4, 8 Number of units’ measurement channels
Configuration parameters for channel No. 1
40h Yes 0÷2
“ Input type ” parameter in “ Inputs settings ” submenu for channel 1:
0 - inactive; 1 - 0-20mA; 2 - 4-20mA
41h Yes -9999÷9999 “
Lo value ” parameter in “ Inputs settings ” submenu for channel 1
(not considering decimal point)
42h Yes -9999÷9999 “
Hi value
” parameter in “
Inputs settings
” submenu for channel 1 (not
considering decimal point)
43h Yes 0÷3
“ Dec. point ” parameter in “ Inputs settings ” submenu for
channel1: 0 - 0; 1 - 0,0; 2 - 0,00; 3 - 0,000
44h Yes 0÷5
“ Filter ” parameter in “ Inputs settings ” submenu for channel 1:
(filtration coefficient)
45h Yes 0÷399
“
Lower ext.
” parameter in “
Inputs settings
” submenu for channel 1
expressed in 0.01 mA (not considering decimal point)
46h Yes 0÷199
“ Upper ext. ” parameter in “ Inputs settings ” submenu for channel 1
expressed in 0.01 mA (not considering decimal point)
36