User manual for Digital Indicator and cooperating software
device clock shows later time than computer's system clock, then the
synchronization (in this case reversing the
recorded by device after the time set during synchronization to be deleted.
Download the data to the computer
prior to synchronization
in order not to lose it.
Detailed description of individual parameters can be found in the user manual for device.
3.4.
“
DEVICE INFORMATION”
TAB
This tab has three sections:
•
Device
- this section displays information concerning the device type and current
version of
firmware.
•
Memory
- this section displays information on the unit's memory. The [
Erase
]
button irreversibly deletes memory contents. This section is available for
devices equipped with data logging function.
Memory erase should be done
ONLY IN EXCEPTIONAL SITUATION!
During
normal operation of device (in both mode: "
cyclic
" and "
until full
") memory erasing
IS NOT REQUIRED
.
With memory erasing all measurement results stored in memory
WILL BE
DELETED!
Erase command don't affect data actually downloaded to the PC
.
Fig. 3.5.
Device information
tab options
•
Firmware update
- this section allows updating the device software,
•
USB driver update
- this section allows updating the USB driver.
This section is available for devices equipped with USB
interface.
Detailed description of update can be found in “
UPDATING
SOFTWARE OF SWP-99 DEVICE
”
section.
Informations in
Device
and
Memory
sections are being updated while reading,
writing or synchronizing date and time of the unit.
50
Erasing
device memory
Updating device firmware
i
i
i
