User manual for Digital Indicator and cooperating software
Changes of settings configuring the operation of a given channel and operation stoppage are
signalled in the form of a vertical line (Fig. 6.12).
If the settings of the horizontal scale (time scale) will be too big (time/point) in relation
to speed of changes of the measurement signal, the graph can become illegible. If
this is the case, change the time scale settings. The horizontal scale settings (time
scale) can be changed in the "
Graph options
" menu. In order to go to the
"
Graph options
" menu press the
[ESC/MENU]
key.
Fig. 6.13. Message displayed when loading data to be displayed on the graph.
If downloading the data (measurement results from memory) necessary for displaying
the graph takes more than 1 second an appropriate message is displayed (Fig. 6.13).
Pressing
[ENTER]
will stop the data downloading process and display a graph made
on the basis of the data downloaded so far. "
X
" will be displayed instead of data that
was not downloaded (Fig. 6.14).
Fig. 6.14. Display in "
Graph
" mode in the case where data upload was stopped.
Functions of keys in "Graph" mode:
•
go to main menu (press and hold for approx. 2 seconds),
•
go to "
Graph options
" menu, description on page 27.
•
change channel number,
•
change results presentation mode.
6.2.3.
”Channels List” mode
In this mode (Fig. 6.15, 6.16) the display shows the results of the current measurements
for the active channels of the unit. The measurement results can be presented in numeric form
21
i
i
MENU
ESC
Progress bar
pressing of [
ENTER
] button
stops data downloading
”X” sign displayed
instead of data that was
not downloaded
graph created
from downloaded
data
