35
Procedure for selecting the climatic curve
To select the preferred climatic curve:
– from the
“main screen”
turn the
encoder to select the
“Mode”
(Mode) function
– press the
click
encoder to go to the screen to select the
“
Function mode”
. Turn the
encoder to select
“Winter”
(Winter) mode
– press the
click
encoder to confirm the highlighted
“Mode”
and go to the
“rows”
Summer
Winter
Off
DHW
MAN
40
°C
Heating
AUTO
20
°C
Holiday function
OFF
Esc
MENU
MODE
ZONES
Mon 01.01.2018
10:30
Fig. 52
– turn the
encoder to select
“Heating”
(Heating)
– press the
click
encoder to confirm
“Heating”
(Heating) and
open the submenu
Heating
Zone 1
[...]
Zone 2
[...]
Summer
Winter
Off
DHW
MAN
40
°C
Heating
AUTO
20
°C
Holiday function
OFF
Esc
Fig. 53
– turn the
encoder to select the desired zone e.g. Zone
1 (Zone 1)
– press the
click
encoder to confirm the highlighted item and
enter the row
– turn the
encoder to select
“Ext. probe modul.”
(Ext.
probe modul.)
Circuit 1
Function Mode
ON
Flow Temp. max set
20°C
Flow Temp. min set
17°C
Ext. probe modul.
NO
Weather comp. curve
1.0
Weather comp. Offset
0°C
Fig. 54
– press the
click
encoder to confirm the highlighted
“Row”
and access the modifiable area
– turn the
encoder to set the value to
“YES”
(YES)
– press the
click
encoder to confirm any modifications made
and go back to the
“Ext. probe modul.”
(Ext. probe modul.) row.
Circuit 1
Function Mode
ON
Flow Temp. max set
20°C
Flow Temp. min set
17°C
Ext. probe modul.
YES
Weather comp. curve
1.0
Weather comp. Offset
0°C
Fig. 55
Repeat to set the desired
“Climatic curve”
and
“Climatic curve
offset”
.
6.14.2 Chrono-thermostat or Air Thermostat
The electrical connection of the chrono-thermostat or air ther-
mostat has already been described. When fitting the component
in the room where the readings are to be taken, follow the in-
structions provided on the packaging of the product itself.
6.14.3 Installing the WiFi antenna
To install the WiFi antenna provided with the boiler, follow the
procedure described below:
– remove the WiFi antenna (1) from the document pouch
– remove the protective cap on the connector (2) in the lower
part of the boiler
– connect the WiFi antenna (1) to the connector (2)
– position the WiFi antenna in one of the three slots (3) on the
cover (4). Choose the slot that guarantees the best signal re-
ception in the room, ensure the WiFi antenna is positioned
with the flashing LED light facing away from the boiler.
m
CAUTION
To configure the app and WiFi network, please see the
relevant documentation provided with the boiler.
1
3
4
2
1
Fig. 56
d
IT IS FORBIDDEN
– Modify/tamper with the WiFi antenna connection
cable.
– Position the WiFi antenna inside the boiler.