56
– press the
click
encoder to confirm the highlighted
“Row”
and access the modifiable area
Regulation room 1
Function Mode
AUTO
Set AUTO comfort
20.5°C
Set AUTO reduced
17.0°C
Set MAN
19.2°C
Program. Time
[...]
Room probe run
YES
Fig. 117
– turn the
encoder to modify the
“Data/value”
in the per-
mitted field (e.g. MAN - AUTO - OFF)
– press the
click
encoder to confirm any modifications made
and go back to the row
“Function mode”
(Function Mode).
m
CAUTION
The settings described above must be done for all
zones.
7.3.7.8 CONFIGURATION menu
From the
“Main screen”
:
MENU
MODE
ZONES
Mon 01.01.2018
10:30
Fig. 118
– turn the
encoder to select the
“Zone”
(Zones) function
– press the
click
encoder to go to the screen to select the
“Zone”
(Zones)
Zones
Zone 1
[...]
Zone 2
[...]
Zone 3
[...]
Zone 4
[...]
Fig. 119
– turn the
encoder to select the desired zone e.g. “Zone
1” (Zone 1)
– press the
click
encoder to confirm the highlighted zone and
go to the row
– turn the
encoder to select the
“Configuration”
(Config)
menu
Zone 1
Information
[...]
Regulation
[...]
Config
[...]
Fig. 120
– press the
click
encoder to confirm the selected submenu
and access the relevant data display
Config room 1
Room probe
[...]
Water circuit
[...]
Fig. 121
– turn the
encoder to select the required submenu
– press the
click
encoder to confirm the selected submenu
and access the relevant data display
Room probe room 1
Type
OT
Address M3
0
Input
0
Status
--
Fig. 122
– press the
click
encoder to confirm the highlighted
“Row”
and access the modifiable area
Room probe room 1
Type
OT
Address M3
0
Input
0
Status
--
Fig. 123
– turn the
encoder to modify the
“data/value”
in the per-
mitted field (e.g. OFF - OT - TA - RF - M3)
– press the
click
encoder to confirm any changes made and
go back to the highlighted
“Row”
.
