Sime BRAVA SLIM 30 BFR, Installation And Servicing Instructions

Page: 54 / 60

54
13.6 Remove/replace ignition electrode and
nozzles
– Remove front panel (see " Remove panels " on page 51)
– Remove the front panel of the sealed chamber (see " Sealed
chamber panel " on page 51)
– Remove the front panel of the combustion chamber (see "
Combustion chamber panel " on page 52)
– remove the swivel joint (9) and the counter-nut (10)
– remove the screws (11)
– remove the gas collector (12) and replace the factory nozzles
9
7
10
11
12
8
Fig. 74
– unscrew the screw (7)
– remove the ignition electrode (8)
13.7 Remove/replace gas valve
– Close the gas valve
– remove the front panel (see " Remove panels " on page 51)
– move the control panel (A) into a horizontal position (see "
Rotate control panel " on page 52)
– disconnect the electrical connector (2)
A
2
Fig. 75
– unscrew the swivel joints (3) and the screws (4)
4
3
Fig. 76
– extract the gas valve (5)
5
Fig. 77