19-5225S-M-01 Rev 2
43
To clean the emitter points and
areas around the emitter points,
moisten a cleanroom-compatible
swab with the IPA solution, or use
Simco-Ion Emitter Point Cleaner.
Gently rotate the swab around the
emitter point until dirt or debris is
removed.
Do not alter emitter points in any
way. Doing so may void the
warranty.
Emitter Point Replacement
Emitter point replacement is recommended every 24 to 36 months,
or when damage or erosion is evident.
To remove emitter points
: Use a soft-jawed tool to remove silicon
points. Silicon points are brittle and may break if handled roughly.
When pulling a silicon point out, keep the point straight. Do not
move the emitter point from side to side, or the point may snap.
Figure 11. Removal of Silicon Emitter Point
Clean the area around the socket with a cleanroom-compatible
cloth and IPA solution before inserting new points.
Figure 10. Cleaning Points with the
Emitter Point Cleaner
Summary of Contents for AeroBar 5225S
