19-5225S-M-01 Rev 2
22
Battery Life and Replacement
The Remote Control uses two AA alkaline batteries. Life is
approximately 60 hours for full operation, and approximately 500
hours while in sleep mode. If the battery voltage drops to ~2V, low
battery will be indicated on the second line of the LCD display. Turn
the remote control off with the slide switch to conserve battery life.
Sleep Mode
The Remote Control Model 5570 automatically goes into sleep
mode if there is no button activity for 15 seconds. Press the Esc key
to awaken the remote control. While in sleep mode, the LCD
displays:
Use ESC
To Awake
If the battery is low during sleep mode, the bottom line is replaced
with
LowBatt
.
Garbled Responses
If you see “ReTry” or “&$%#” on the bottom line of the Remote
Control, the Remote Control may be too close to the AeroBar or is
not lined up correctly. Move farther away from the AeroBar and
target the infrared source at the center red LED.
Remote Control Menu
The following table lists the parameters in both menus of the
Remote Control. The TFSMenu is a password protected menu. Use
the UP or DOWN buttons to scroll through these parameters.
Summary of Contents for AeroBar 5225S
