Sim2 40-50-ST, User And Installation Manual

Page: 32 / 175

MICO 40-50-ST
MiCO 50
30
Video Compatibility Chart
Resolution H-Freq (kHz) V-Freq (Hz) Component
Support
S-Video
Support
Composite
Support
HDMI
Support
SD Video NTSC 640x480i 15.7 59.94/60
P P P
PAL 768x576i 15.6 50
P P P
SECAM 768x576i 15.6 50
P P P
NTSC-4.43
P P P
PAL-M
P P P
PAL-N
P P P
NTSC-J
P P P P
PAL-60 60
P P P
NTSC-50 50
ED TV 480p 720x480p 31.5 59.94/60
P P
576p 720x576p 31.3 50
P P
1035i/60 1920x1035i 33.8 60
P P
HD TV 1080i/50 1920x1080i 28.1 50
P P
1080i/60 1920x1080i 33.8 59.94/60
P P
720p/50 1280x720p 37.5 50
P P
720p/60 1280x720p 45.0 59.94/60
P P
1080p/24 1920x1080p 27.0 24
P P
1080p/25 1920x1080p 28.1 25
P P
1080p/30 1920x1080p 33.8 30
P P
1080p/50 1920x1080p 56.3 50
P P
1080p/60 1920x1080p 67.5 60
P P
HTPC 720p/48 1280x720p 36 48
P
1. Component supports signal formats are Y/Pb/Pr, Y/Cb/Cr.
2. VGA port support signal formats are RGBHV, RGsB, and RGBCs.
DTV
Signal Horizontal Frequency (kHz) Vertical Frequency (Hz) HDMI Support
480i 15.7 60
480p 31.5 60
P
576i 15.6 50
576p 31.3 50
P
720p 45.0 60
P
720p 37.5 50
P
1080i 33.8 60
P
1080i 28.1 50
P
1080p 27 24
P
1080p 28.1 25
P
1080p 33.8 30
P
1080p 56.3 50
P
1080p 67.5 60
P
English
MiCO 50
31
Troubleshooting
Problem Check
Projector does not start
Projector power cord is not plugged into the wall outlet.
Projector power switch does not turn on.
Remote control batteries have run out.
No picture
The selected input mode is wrong.
Cables may be incorrectly connected to the rear panel of the projector.
Power to the external connected device is off.
The video signal format of the video equipment is not set correctly.
faded
Picture adjustments are incorrectly set.
blurred
Adjust the focus
The projection distance exceeds the focus range.
Noise
(Component/VGA input only)
Perform "Frequency" adjustments also in component.
Perform "Phase" adjustments also in component.
green on COMPONENT
Change the input signal type of the video equipment.
dark / bright and whitish
Picture adjustments are incorrectly set.
too bright and whitish
Picture adjustments are incorrectly set.