bypass
Hold simultaneusly the two switches
to reset the device
In order to reset the device at the factory default settings you must hold
simultaneously the BYPASS and UP Switches for 3 seconds. You will be asked to
confirm this procedure: press “UP” Switch to definitively reset, “Down” Switch if you
do
not want to reset. After the reset procedure all the Source and Target Basses inside
XT-B will be restored to those of factory default setting. It is strongly suggested to
make a backup before making this procedure, in order not to definitively lose your
previous configuration.
In order to get the XT-B Code, a unique serial number, hold for 3 seconds the BYPASS
Switch, and it will appear on the display. This code is useful to register your device in
the SIM1 Web-Store (https://store.sim-one.it/). This procedure will allow you to use in
the new sounds you will buy or you will download for free from the Community. Please
note that if you do not enter the Serial Number Code on the Web/App correctly, the
downloaded sounds will not be correctly installed in your XT-B device and it will report
an error.
bypass
Hold the Bypass switch
To get the XT-B Code
Summary of Contents for XT-B
Page 1: ...Firmware 1 0...
