Target
Bass
Pickup
Source
Bass
Pickup
Pickup Matching
9. For each Bass Profile Preset, while performing, it is
recommended to activate the Pickup of your Source Bass
according to the suggestion of the display. This allows to
reach a sound as close as possible to that one of the
original Target Bass.
When the BYPASS MODE is activated the Check Indicator
shows the red light and the message “
True Bypass
”
appears on the Display. Now the signal is not processed in
any way, the sound is the original one of the Source Bass,
and the second line of the display shows the bass/pickup
you are supposed to play on the Source Bass (if you edited
the name before with the Software). Pressing the BYPASS
Switch again, the red light of the check indicator turns off
and the sound will shift to that one of the Target Bass in
use.
The BALANCED OUTPUT, connected directly to the mixer of the PA, is useful for instance when playing the sound
of an acoustic bass guitar. In this way the result will be more realistic and accurate.
The STANDARD OUTPUT must be connected to the bass amplifier. Other effects can be connected in cascade,
both through the BALANCED OUTPUT or through the STANDARD OUTPUT.
Summary of Contents for XT-B
Page 1: ...Firmware 1 0...
