bypass
Switch Up to end the
Learning procedure
bypass
%
Select
Down or Up
5. If you are satisfied with the quality rating, then press the UP switch, otherwise
press DOWN switch and repeat the last pickup configuration.
6. If you selected the 3-pickup option, repeat steps 4-5 for mid (both pickups
active) and bridge pickup. (For any reason, during individual Pickup configuration,
it is possible to stop the Learning Procedure pressing the DOWN switch for 2
seconds).
7. After you have configured the last pickup (Bridge PU), the system will make a
computing process of the sounds loaded in the XT-B (Display: Computing
Progress 00%...100%).
8. At the end of the Computing Process, press the UP switch again to end the
Learning procedure. At this point the Target Bass profiles included in XT-B will be
associated to the pickups you just configured. Scroll UP and DOWN the Switch
selectors to test the variety of sounds.
Summary of Contents for XT-B
Page 1: ...Firmware 1 0...
