Back-up & Upgrade for the Configuration Manager Software
XT-B is equipped with a USB Port 2.0, which must be used strictly with a USB
pendrive in order to transfer the Back Up of profiles (both source basses and target
basses) from XT-B to the Configurator Manager Software, and to reload your
profiles (Upgrade) in your device after editing.
bypass
Insert the USB pendrive in the USB port, then for 3 seconds
press the DOWN Switch. At this point on the display will appear
“Back Up…”. Leave the USB
pendrive inserted into unit until all
the data will be transferred
to the key, and “Done!” will appear on
the display. Now it is possible to remove the pendrive and to
insert it to the PC/MAC in order to import the Back Up file
(xtb.arc) of your XT-B on the Configurator Manager.
…
bypass
Once all data have been saved from the Configurator Manager
to the Pendrive, bring it back to the USB port of the pedal, then
for 3 seconds press the UP Switch. At this point on the display
will appear “Upgrade..”. Leave the
pendrive inserted into the unit
until all the data has forwarded to the XT-B
, and “Done!” will
appear on the display. Now it is possible to extract the pendrive.
…
…
…
Summary of Contents for XT-B
Page 1: ...Firmware 1 0...
