SIM1 XT-B, Quick Start Manual

Page: 6 / 16

bypass
Hold Down
+ Up to start
b) Profile one pickup at a time (pickup matching through editor)
This function allows you to record more Source Bass pickups, without modifying
the previous configuration of the pedal. The matching between Target and Source
Bass pickups requires the use of the Editor for PC/Mac.
Useful to:
•
Record, as Source Basses, some unusual pickup configurations, different from
Neck, Mid (both pickups activate) or Bridge positions;
•
Record as many Source Basses as you want, to use in a different moment;
•
Profile one or more Basses to be used as Target Guitars (Source Basses can be
Turned into Target Basses
, using the function of the Editor “Show in Target”).
1. Make sure your Source Bass is in tune (440 Hz), with volume/tone open;
2. Adjust the knobs of your Source Bass to get the pickup sound you wish to profile;
3. Hold simultaneously the UP and DOWN switches on the pedal for 3 seconds. When the countdown is finished
the device will start recording (
Hold UP to Abort the procedure
);
4. Play the same chromatic scale explained in the Learn & Play paragraph;
5. The newly created Source Bass will be named with a progressive number (i.e. Guit4, in case Guit1, Guit2, Guit3
were already stored);