Playback Video/Photos
Selecting the required folder for playback
1. In real-time monitoring mode, press the
Button (15)
to display the list of video/photo folders
2. Use the
and
Buttons (18 & 19) to navigate to the
required folder and press the
OK
Button (11) to select
Note:
•
next to a file name indicates video
• next to a file name indicates a photo
Video playback
1. Use the and Buttons (18 & 19) to navigate to the
required video and press the
OK
button to begin playback
PAUSE:
Press the
OK
Button (11) to pause, press it again to
resume playback
FAST FORWARD:
Press and hold the
Button (18) until the
playback mode icon on screen changes to
REWIND:
Press and hold the
Button (19) until the playback
mode icon on screen changes to
STOP/EXIT:
Press the
MENU
Button (12)
Viewing photos
1. Use the
and
Buttons (18 & 19) to navigate to the
required photo and press the
OK
or
MENU
button to view
2. Press the
OK
or
MENU
button again to exit
Deleting video/photos
1. In real-time monitoring mode, press the
Button (15)
to display the list of video/photo folders
2. Use the
and
Buttons (18 & 19) to toggle to the
required folder and press the
OK
Button (11) to select
3. Use the
and Buttons (18 & 19) to select the required
file, then press the
(14) to delete
4. The confirm delete screen is displayed. Use the
and
Buttons (18 & 19) to toggle between ‘Cancel’ and
‘Confirm’
and press the
OK
Button (11)
Deleting folders
Use the same method as above for deleting a single file, but
use the
and
Buttons (18 & 19) to toggle to the required
folder and press the
Button (14) to delete.
System Setting Mode
• You can change system preferences in SYSTEM SETTING
mode
• There are four areas in system setting mode:
-
System Setting
-
Date and Time
-
Recorder Setting
-
Event Playback
Making selections
In all areas of System Setting Mode use the following method
to make selections
• Use the
and
Buttons (18 & 19) to navigate between
options
• Press the
OK
Button (11) to select an option
• Press the
MENU
Button (12) to exit any screen
Entering system setting mode
• In real-time monitoring mode, press the
MENU
Button (12) to
enter System Setting mode
• By default,
SYSTEM SETTING is highlighted
www.silverlinetools.com
7
Video Inspection Camera
913738
Video output
• The Video Cable (21) enables video output to another screen
1. Open the Flexi-Cover (7) to access the Video Out Socket
(10)
2. Insert the video cable jack into the video out socket
3. Insert the other end of the cable into the ‘video in’ socket
of any compatible TV or display device
Note:
If the image is black & white, check the video setting
is correctly set. PAL should be selected for most of Europe.
France uses the SECAM system and some televisions may not
be able to display a colour image with either the PAL or NTSC
setting.
Operation
Switching On/Off
1. To switch on, press and hold the
On/Off Button (13)
for approx. 3 seconds. The Power Indicator Light (6) will
illuminate and the LCD screen will become viewable
2. To switch off, press and hold the on/off button until the
screen goes blank and the power indicator light is no
longer visible
Using the flexible cable
• The flexible Camera Cable (2) can be bent into almost any
shape to circumvent obstacles and gain visual access to
confined areas
• Manoeuvre the cable past obstacles; do not apply excessive
force
Real-Time Monitoring Mode
You can use the following features in real-time monitoring
mode
Zoom
• Press the
Button (14) to zoom in (1.0X, 1.5X, 2.0X,
2.5X, 3.0X). Each press of the button increases magnification
until the fourth press returns the display to 1.0X
• The level of magnification is displayed on the right hand side
of the screen
LED Brightness control
• Four LEDs surround the camera lens to provide illumination
in dark areas. There are five levels of brightness
1. To increase brightness, press the
Button (18)
2. To reduce brightness, press the
Button (19)
• The level of brightness is displayed on screen when any
adjustment is made
Recording video
• Check the micro SD card icon
is displayed on screen. If
not, see ‘Inserting an micro SD card’ above
1. Press the
Button (16) to begin recording
2. Press the button again to stop recording
Note:
• The video will be automatically saved as an individual file
every 30 minutes
• MEMORY FULL is displayed on screen when the micro SD
card is full
Taking photos
1. Press the
Button (17) to take a photo
Note:
You must have an micro SD card inserted to take a photo
913738_Z1MANPRO1.indd 7
23/07/2014 12:09
