GB
8
Attaching the camera accessories
• Four accessories are supplied for use with the camera: Magnet (16), Mirror (17), Hook
(18), and Double Hook (19)
• The Hook, Double Hook, or Magnet can be used to retrieve small items, such as
dropped rings or screws
• All these accessories attach in the same way:
1. On the accessory shaft is a small hook that can be hooked in to the small hole on the
side of the Camera Lens Housing (1) (see C)
2. Align the accessory shaft with the channel on the inside of the Accessory Ring (15) and
slide the Accessory Ring on to the Camera Lens Housing to secure the accessory
(see D)
Video output
• Connect the Video Cable (14) into the Video Out Socket (13) and the other end into a
compatible video viewing device/monitor
• The LCD monitor is now capable of outputting high quality video to another display
Operation
WARNING:
Only the Camera Lens Housing (1) and Flexible Camera Cable (2) are waterproof. The
LCD handset monitor is not waterproof. DO NOT immerse the handset in water and always dry hands
before operating the device, changing the batteries, or pressing any of the buttons on the device.
Switching ON/OFF
1. To turn ON, hold the Power Button (9) down for 3 seconds until the LCD Screen (5)
displays an image
2. To turn OFF, press the Power Button once (Fig IV)
Buttons and features
Screen Rotation Button (10):
• Use this button to rotate the screen to the desired orientation
• See below for the order of rotation
• Press the button once to rotate and cycle through the orientations:
Normal
Mirror
Normal Upside Down
Mirror Upside Down
Normal
Camera Lens LED Light Button (11):
• Use this button to adjust the brightness of the LED light at the end of the Camera
Lens Housing (1)
• Press the button once to activate the light and the on-screen gauge (see Fig V)
• Press the button again when the gauge is active on the LCD Screen to increase
the brightness level and continue pressing the button to cycle through until the
light deactivates
LCD Brightness Button (12):
• Use this button to adjust the brightness of the LCD Screen (5)
• Press the button once to activate the gauge (see Fig VI) and repeatedly press the button
to increase the brightness and cycle through back to the lowest brightness setting
Accessories
• The inspection camera is compatible with other quality Silverline products:
SKU
Product
199374
2m Inspection Camera Flexible Extension
200259
Video Inspection Camera Head 50° angle lens
• Contact your Silverline stockist for more information
Maintenance
• Ensure all parts are clean and dry before storage
• Clean with care using a damp cloth or similar if needed
• Do not immerse any part of the LCD handset in water and do not use abrasive cleaning
materials on any part of the device
Storage
• Always remove batteries before storing for a long time to prevent battery drain, battery
leakage, and damage to the device
• Store the product and all accessories in the case supplied, in a dry environment out of
the reach of children
Disposal
• Do not dispose of power tools or other waste electrical and electronic equipment (WEEE) with
household waste
• Contact your local waste disposal authority for information on the correct way to dispose of power
tools
F
F
F
F
676660_Manual.indd 8
17/05/2017 08:41
