![background image](http://html1.mh-extra.com/html/silverline/631320/631320_user-instructions_1273668008.webp)
GB
8
Troubleshooting
Problem
Possible cause
Solution
No function when On/Off Trigger (7)
is operated
No power
Check power supply
Defective On/Off Trigger
Replace the On/Off Trigger at an authorised Silverline service centre
Sander pulls to the side
during operation
Off-centre sanding belt
Adjust the Belt Tracking Adjuster (6) to align the belt. If problem persists, refit the belt as
instructed in ‘Fitting a sanding belt’
Loose sanding belt
Ensure the Belt Release Lever (10) is securely closed. If problem persists, refit the belt as
instructed in ‘Fitting a sanding belt’
‘Squealing’ sound or intermittent loss
of power whilst sanding
Drive belt is worn
Replace the drive belt as instructed in ‘Drive belt replacement’
Belt sander running despite not
touching the On/Off Trigger
Lock On Button (2) activated
To stop the machine, squeeze and release the On/Off Trigger
631320_Manual.indd 8
23/05/2017 17:24