![background image](http://html1.mh-extra.com/html/silverline/247820/247820_instructions-manual_1273547008.webp)
GB
8
Problem
Possible cause
Solution
No function when ON/OFF Rocker
Switch (2) is operated
No power
Check power supply
Defective ON/OFF Rocker Switch
Have the ON/OFF Rocker Switch replaced by an authorised Silverline service
centre
Slow material removal
Sanding Belt (7) too fine or worn
Fit new Sanding Belt with coarser grit
Scratches on workpiece after
sanding
Sanding Belt too coarse
Fit new Sanding Belt with finer grit
Not enough material removed
Continue sanding
Burn marks on workpiece
Sanding Belt incompatible with material
Fit correct Sanding Belt
Too much pressure exerted on to the File Arm (8)
Use less pressure whilst moving the machine
Belt slides off the File Arm (8)
when turning
Belt not installed correctly
Follow instructions in ‘Fitting a sanding belt’
Worn or defective Sanding Belt; belt with wrong
dimensions
Fit a new Sanding Belt
Troubleshooting
247820_Manual.indd 8
14/09/2017 09:35